When the following screen appears, click [Yes].
In Server 2003/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2, this screen is not displayed. Proceed to the
following procedure.
Select the machine, and click [Next].
If no machines are displayed in [Device List]
Check the computer and machine connection and IP address settings (Viewing Network Settings (e-Manual)), and click
[Update Device List]. If the machine is still not displayed at all, click [Search by IP Address]
enter the IP address set on the
machine
[OK].
Select the drivers to install, and click [Next].
If you did not select [Printer], proceed to step 14.
If you did not select either [Printer] or [Fax], proceed to step 15.
11
12
㻞㻞㻌㻛㻌㻠㻣
To Next Page