Canon MK3000 - List of Message

147
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
List of Message
If a problem occurs while connected to the printer, an error message or warning message will be
displayed on the status monitor. Read the message, and follow the corresponding procedure.
Message Solution
Low ribbon level The ribbon is running low. Prepare a new ribbon cassette.
Low battery level
For more information, refer to
"Battery is running low. (P.183)"
.
No Media For more information, refer to
"Print media isn’t set. (P.181)"
.
End of Media For more information, refer to
"End of media. (P.181)"
.
End of Ribbon For more information, refer to
"End of ribbon. (P.182)"
.
No ribbon cassette For more information, refer to
"Ribbon cassette isn’t set.
(P.181)"
.
Media JAM For more information, refer to
"Feed error (P.183)"
.
Cover is Open You cannot print with the cover open. Close the cover and press
any key.
Check of the size switch
lever
For more information, refer to
"Size switch lever is not
positioned correctly. Proceed? (P.182)"
.
Cutter Initialization
Error
Press any key. If the same message appears again, contact your
place of purchase.
Head initialization error
Head print position
error
Warmer temperature
rise delay error
Turn o the printer and set the warmer again.
(P.31)
If the same message appears again, contact your place of
purchase.
Warmer abnormal
temperature error