Canon SELPHY DS810 - Confirming or Changing the Device Settings

Printing Photographs Directly from a Digital Camera
• Confirming or Changing the Device Settings
To change the paper size or paper type, operate the device to select the
PictBridge print setup mode and confirm or change the settings.
The settings below can be changed by pressing the Settings button when the
device is connected. However, changes
can be made on the Settings screen
only when the corresponding items below are in Default (selections based
on
the printer setting) using the controls of the device.
PictBridge compliant device
IPrinter setting on the Settings screen
setting items
Paper size: Default
You can change the printer settings on tab1.
Paper type: Default
See "Print Setting Items" on page 25.
Layout: Default
Image Optimize: Default
You can change the printer settings on tab2.
See "Print Setting Items" on page 25.
About the Settings Explained Below
The settings explained on the following pages cannot be made on some
devices.
If any setting cannot be made, the default setting explained above is
used.
Names
of settings that are displayed on Canon PictBridge compliant devices
are used in the description given below.
Different names may be displayed
on your device depending on the brand or
model.
For details, refer to your device's instruction manual.
• About Image Data Format for Printing
This printer accepts images* taken with a camera compatible with the Design
rule for Camera
File system and PNG files.
*Exif
2.21 compliant
• About "Paper size" and "Paper type"
When you have selected Default (selections based on the printer setting), the
printer operates based
on the Settings screen. To print on Photo Paper Pro,
select Fast Photo from Paper type on the display ofthe device. Select Photo for
47