Why is Bluetooth not working on my Canton Speakers?
If you are experiencing no playback via Bluetooth on your Canton Sound M speakers, first ensure that Bluetooth is enabled on your (mobile) device. If it is, check if the Sound M is connected to another (mobile) device and disable Bluetooth on that device. If neither of these solves the problem, try pairing your device with the Sound M.
Why do my Canton Speakers unintentionally change the input?
If your Canton Sound M speakers are unintentionally changing the input, it may be because the 'Input Select' function is set to AUTO, and the currently selected input (AUX Line) has a long break in playback (over 10 seconds), while a signal is present at another input or a device is turned on at the optical and coaxial input. To resolve this, ensure that no signal is present at any other input during playback at the AUX (Line) input, or that no device is switched on at the optical and coaxial digital input.
How to disable Autoplay on Canton Speakers?
If playback from your (mobile) device starts automatically when the Canton Sound M is switched on, the automatic playback function 'Autoplay' is likely activated. To stop this, set the 'Autoplay' function to 'OFF'.
Why paired wireless Canton Speakers don't turn on with the Soundbar?
If your Canton Sound M paired wireless speakers do not turn on together with the Soundbar, ensure that all slave speakers are paired according to the instructions. Also, if the 'Standby Mode' function is set to ECO, each speaker must be switched on separately with the remote control; to switch all speakers on together, set the parameter to NETWORK, MANUAL, or AUTO.
How to fix pairing failure on Canton wireless speakers?
If pairing of wireless speakers fails with your Canton Sound M, disconnect the slave speaker to be paired for at least 30 seconds from the mains. Ensure that the slave speaker is powered up using the 'Power-button' after turning on the power switch. Always start pairing at the Soundbar before connecting the slave speaker to the mains. Reduce the distance between the Soundbar and the slave speaker, keeping it within a maximum of 10m in the same room.
What to do if two Canton Speakers play the same channel?
If your Canton Sound M speakers have two speakers playing the same channel, it means that two slave speakers were assigned the same channel during pairing. To fix this, first use the test tone to identify which speaker is playing the wrong channel. Then, reconnect this speaker and select the correct channel. Also, the source device on the coaxial or optical digital input has not been switched off or the source device does not switch off its S/PDIF transmitter in standby mode, so in order to switch from the coaxial or optical digital input, the source device must be switched off or disconnected from the mains.
General| Audio decoders | DTS Digital Surround, Dolby Digital |
|---|---|
| RMS rated power | 300 W |
| Audio output channels | 2.1 channels |
| Audio Return Channel (ARC) | Yes |
| Wi-Fi | - |
| HDMI in | 3 |
| Bluetooth version | 5.0 |
| HDMI ports quantity | 4 |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Woofer diameter | 50 mm |
| Tweeter diameter | 19 mm |
| Crossover frequency | 3000 Hz |
| Woofer diameter (imperial) | 2 \ |
| Tweeter diameter (imperial) | 0.75 \ |
| Cables included | AC, HDMI, Optical |
| Display type | LED |
| Product color | Black |
| Power consumption (standby) | 0.4 W |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 725 mm |
| Height | 65 mm |
| Soundbar weight | 4000 g |
Adjusts volume level for each speaker channel.
Sets speaker distance for optimal spatial effect.
Enhances speech intelligibility for clearer dialogues.
Selects from three equalizers to match room conditions.
Adjusts tone control settings for bass, mid, and treble.
Sets the Sound M to shut down into standby mode after a specified time.
Includes functions for IR operation using a TV or universal remote.
Allows learning infrared codes from other remote controls.
Enables direct input selection using a third-party remote.
Deletes all learned IR codes stored on the Sound M.
Controls devices connected via HDMI inputs/outputs.
Controls how the Sound M powers up and down.
Assigns default names to physical inputs or deactivates them.
Automatically or manually changes input based on signal availability.
Allows connection of an external subwoofer.
Changes the phase of a connected subwoofer.
Corrects audio/video synchronization issues.
Limits the maximum settable volume level.
Controls dynamic range for audio streams.
Configures display functions on the front and OSD.
Changes the On-Screen menu language.
Activates or deactivates the info bar on the TV screen.
Synchronizes LED displays of connected Smart speakers.
Activates additional playmodes beyond standard ones.
Resets the Sound M to its factory settings.
Connects Canton Smart series speakers wirelessly.
Deletes all paired speaker connections and resets the module.
Adjusts the transmission power of the wireless audio module.
Selects a specific radio channel for the wireless audio module.
Configures features related to Bluetooth wireless technology.
Deletes Bluetooth settings and paired devices.
Automatically starts playback from a connected Bluetooth device.
Displays firmware version information for various components.
Activates or deactivates logging function for operating status.
To Next Page
