CaptionCall 67TB - Page 95

Customer Support 1-877-557-2227
Page 95
Settings
5. Touch the Save button to save the password.
6. The CaptionCall phone will then attempt to connect to the selected wireless
network.
7. When the CaptionCall phone successfully connects to the selected wireless
network, the name of the network will be displayed in green letters.
Other Options
The Advanced Wireless settings screen displays the current wireless network
settings of your CaptionCall phone and lets you change them if needed.
WARNING
You should not change any wireless network settings unless you have the technical
knowledge required to do so. Invalid wireless network settings may prevent your
CaptionCall phone from working properly.
To change wireless network settings:
1. Touch the SSID button. A list of available networks will be displayed in order of
signal strength. Select the wireless network you want to use from the list.
2. Touch the Network Type button and select the type of security used by the
wireless network you have selected.
3. Touch the Encryption button and select the type of encryption used by the
wireless network you have selected.
4. Touch the Network Key button and use the on-screen keyboard to enter the
password (key) required by the wireless network you have selected.
5. Touch the Save button to save the password.
6. Touch the Save button to save all changes. The CaptionCall phone will then
attempt to connect to the selected wireless network.
7. Look at the list of wireless networks on the Wireless settings screen. If the name
of the wireless network you configured is shown in green, your wireless network
settings changes are valid. If the name is shown in white, this means there is no
saved information for this SSID. If your changes are invalid, the name will display
with the word FAILED in orange.
You can also manually configure the DHCP settings for wireless networks. See page
93 for instructions on manually configuring DHCP.