8200-M585-O1 Rev D 210 Installation & Technical 103
LIVESTOCK WEIGHER MODE OPERATION
To weigh a single animal:
1. Direct animal onto scale.
2. Press the PRINT key after scale weight has stabilized.
3. If you have ID printing enabled (id=YES), you will be prompted to key in an ID associated
with this ticket. Key in your desired alpha/numeric ID and then press ENTER.
4. The ticket will print, and the remote display(s) will lock onto the printed weight while animal
remains on the scale.
5. Remove animal from scale and repeat for additional animals.
To weigh many animals on a single ticket:
1. Direct all animals onto scale.
2. Press the Fn key.
3. The indicator will prompt for a head count (CoUnt=). Key in the number of animals being
weighed.
4. Press ENTER if still loading animals onto scale, and the head count will be retained for the
next print (or if all animals are loaded press the PRINT key to immediately print the ticket;
Skip next step).
NOTE: Note that the head count value will be cleared after each ticket printed.
5. Press the PRINT key to print the ticket.
6. If you have ID printing is enabled (id=YES), you will be prompted to key in an ID
associated with this ticket. Key in your desired alpha/numeric ID, then press ENTER.
7. The ticket will print, and the remote display(s) will lock onto the printed weight while
animals remain on the scale.
8. Remove animals from scale and repeat for additional animals.
The indicator will automatically keep a running total of animal data printed.
To print the totals of consecutive tickets:
1. Press the (asterisk) key.
2. The indicator will display FUnCt=.
3. Press the PRINT key.
4. Total ticket will be printed containing total weight, total head count, and average weight.
5. These values will be reset after the total ticket is printed.
To Next Page
Loading...
Need help?
General
