8200-M698-O1 Rev B 225 Installation and Technical
100
ID STORAGE OPERATION, CONT.
Permanent Identification (ID) Strings, Cont.
To Delete A Permanent ID String
1. With the indicator in normal operations mode, press the MEM key. The display will
change to show Id=.
2. Enter the ID string to be deleted and then press the DELETE key.
3. The display will show Id deleted momentarily.
4. The ID string entered along with its associated accumulator will be deleted.
5. The indicator will return to normal operation.
To Print A Permanent ID String
1. With the indicator in normal operations mode, press the MEM key. The display will
change to show Id=.
2. Enter the ID string and then press the PRINT key.
3. A ticket containing the stored weight, the accumulated weight along with the ID string
will be printed and the indicator will return to normal operation.
4. If the ID string entered does not exist, the display will show ID NOT FOUND and then
indicator will return to normal operation.
To Delete All Permanent ID Strings
1. With the indicator in normal operations mode, press the MEM key. The display will
change to show Id=.
2. Press the DELETE key. The display will show Del All?NO, which asks if all ID
strings are to be deleted.
3. To delete all ID strings, press the YES key (display will change to Del All?YES)
and then press the ENTER key.
4. All ID strings and the associated accumulators will be deleted.
5. The indicator will return to normal operation.
To Print All
ID Strings:
1. With the indicator in normal operations mode, press the MEM key. The display will
change to show Id=.
2. Press the PRINT key. The display will show Printing while all currently stored ID
strings are printed.
3. The indicator will return to normal operation.
To Next Page
Loading...
