8200-M698-O1 Rev B 225 Installation and Technical
101
ID STORAGE OPERATION, CONT.
PERMANENT ID
Single Pass Transaction (One-Step Operation)
The single pass transaction (one-step operation) is used to weigh LOADED containers with a
permanent ID string and a previously stored tare weight associated with that ID string. This
requires weighing the empty container in advance or if the empty weight is known, by entering
that value as a manual tare weight when adding the permanent ID.
Single ID (Loaded Container With One ID Prompt)
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12-digit alphanumeric ID string and press the ENTER key.
4. The display will momentarily show Ref= (and the name associated with the ID) then
change to Print Pass 2 before returning to the Gross weight display.
5. The Net weight will be added to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
Multiple IDs (Loaded Container With Two ID Prompts)
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12-digit alphanumeric ID string and press the ENTER key.
4. The display will momentarily show Ref= (and the name associated with the ID) then
change to ID2= (the Prompt 2 name entered in ID Storage Setup).
If only one ID prompt is needed, press the PRINT key to store the weight and print
the ticket. Proceed to Step 7.
5. If two ID prompts are required, enter up to a 12-digit alphanumeric string for the second
ID prompt.
6. Press the PRINT or ENTER key to store the tare weight and print the ticket.
7. The indicator will print a ticket; display Print Pass 2 before returning to the Gross
weight display.
8. The Net weight will be added to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
To Next Page
Loading...
