8200-M698-O1 Rev B 225 Installation and Technical
75
CALIBRATION AND SETUP, CONT.
Scale 1 Setup Completed
The SCALE 1 setup has been completed, press PREV (Navigation Keys UP Arrow) to
return to SCALE 1 SETUP MENU #1 or press EXIT (Navigation Keys Down Arrow) to return
to the SETUP MENU #2.
SETUP MENU #2
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0 ` NEXT ^ PREV
With the SETUP MENU #2 displayed,
Proceed to the next setup parameter.
Press PREV (Navigation Keys UP Arrow) to return to SETUP MENU #1.
Press NEXT (Navigation Keys Down Arrow) to proceed to the SETUP MENU #3.
To Next Page
Loading...
