3
4
revision 0 date: 07/19 doc. AG525990
Nota: Non è possibile elencare tutti i rischi
potenziali.
3.2 APPLICAZIONI FORESTALI
3.3 PRECAUZIONI DA OSSERVARE PRIMA
DELLA MESSA IN MOTO
• Engage the parking mechanism (e.g. parking
pawl, parking brake).
• Before getting o, stop the engine, move
attachment down to the ground and securely
engage the parking mechanism (e.g. parking
pawl, parking brake). After that, also remove the
key if leaving tractor unattended. If you leave
a gear engaged with engine stopped, tractor
movement is NOT inhibited.
• Disable all hydraulic distributors.
• Disengage the PTO.
• Keep away from the PTO or attachments in
operation.
• Before any maintenance intervention to the
machine, wait until all movements halt.
• This tractor is not designed for use as recreational
vehicle.
• The tractor can be equipped with various safety
control sensors. Tripping of these sensors
establishes safety operating conditions. Do not try
to disable these functions since this might lead to
serious danger and tractor might respond in an
unpredictable way.
Note: It is not possible to list all potential risks.
3.2 FORESTRY APPLICATIONS
Standard tractors do not oer sucient protection
against forestry application risks such as trees or
branches falling on the protection structure and
penetration of objects into the protection structure.
3.3 PRECAUTIONS BEFORE STARTING
Before starting the engine, make sure all controls are set
to neutral position, especially the power take-o lever.
Start the engine only in well ventilated environment.
Before starting the tractor, ensure that nobody is
standing nearby. Completely loosen the parking brake
before moving o. Do not approach any job if tractor
conditions are not satisfactory.
To Next Page
Loading...
