5
revision 0 date: 07/19 doc. AG525990
5.35 GANCI DI TRAINO
ATTENZIONE: rispettare capacità di carico
massima dell’attacco del trattore.
Regolazione dell’altezza del gancio di traino
per modello scorrevole.
5.35 HITCHES
CAUTION: Comply with the maximum
loading capacity allowed by tractor hitch.
Various congurations complying with the
European standards CE, ,C or D2, are available
as options.
Adjusting hitch height for sliding model.
Set hitch height a follows:
- Press button (2) and pull lever (1)
- Let hitch (3) slide to desired position.
- Release lever (1)
Set drawbar height a follows:
- Remove clip (4) on either side.
- Safely support drawbar mount and remove shaft
(5) on either side.
Set hitch to required position, reinstall side pins (5),
remove the support and install locking clips (4) on both
sides.
5.34 REGOLAZIONE IN ALTEZZA DELLA
BARRA OSCILLANTE
5.34 ADJUSTING DRAWBAR HEIGHT
To Next Page
Loading...
