6
revision 0 date: 07/19 doc. AG525990
6.5.2_BIS - Vericare concentrazione additivo
nel liquido refrigerante
6.5.2_BIS - Check coolant additive
concentration
-
- Open the cooling system cap (1) carefully
- Check the coolant additive concentration in the
cooler/compensation tank (2) with a conventional
antifreeze measuring device (3) (e.g. hydrometer,
refractometer).
- Necessary coolant additive concentration
Coolant mixing ratio.
6.5.3 - Verica la tenuta del sistema di
dissipazione calore
6.5.3 - Check the cooling system seal
ATTENZIONE: utilizzare sempre i DPI
specici per l’operazione da eseguire.
Prestare attenzione al rischio ustione
dovuto a parti calde.
Check hoses status and hose clamps tightness of
cooling system which could cause leaks or failure,
replace damaged components as necessary.
CAUTION: Always use the specic PPE for
the operation concerned. Beware of burns
caused by hot parts.