11
3
revision 0 date: 07/19 doc. AG525990
3.13 MESSA SU SOSTEGNI
3.13 SETTING THE MACHINE ON SUPPORTS
If tractor shall be set onto some supports, rst of all
choose a perfectly at, sturdy enough support surface.
Do not use waste blocks or hollow bricks to support the
machine or any other material susceptible to collapse
under continuous load. Never work under a machine
supported by just a jack. Use suitable supports for
the load to be supported. When using equipment or
accessories together with the machine, always strictly
follow the safety precautions given in the operator's
manual of the accessory or equipment. Before
attempting any intervention on the machine, always set
the accessory or equipment to the ground.
4-wheel drive tractor:
• If the rear axle is on the supports, do not start the
engine (The tractor could in fact move if you work
the brakes (service brake or parking brake).
• If the rear axle is onto a support and if engine
shall be started, the front axle must be set onto a
support, too.
To Next Page
Loading...
