5
114
revision 0 date: 07/19 doc. AG525990
The message “CRUISE ON” appears on the digital
display and indicates the activation of cruise control. If
the hand or foot throttle is released, the engine speed
will be maintained at the value stored.
The engine speed can be corrected in steps of 25
rpm by pressing buttons (1) and (2). Use button (1) to
increase the speed or button (2) to decrease the speed.
The current engine speed is then stored as default.
To change to a new engine speed press button (3)
longer than 3 sec. The message “NEW RPM SAVED”
appears on the digital display.
To Next Page
Loading...
