6
revision 0 date: 07/19 doc. AG525990
6.10.11 Inspect seat belt for damage and
ensure proper working order
Replace entire seat belt if mounting hardware, buckle,
belt, or retractor show signs of damage.
and make sure there are no signs of damage such as
cuts, fraying, extreme or unusual wear, discoloration,
or abrasion. Replace the belt system only with
replacement parts approved for your machine.
The replace operation must be done by an authorised
service centre.
6.10.11 Ispezionare la cintura del sedile per
assicurare il corretto funzionamento in
servizio
6.10.12 Lubricate all greasing points 6.10.12 Lubricare tutti i punti di
ingrassaggio
Lubricate all indicated gresing point.
To Next Page
Loading...
