revision 0 date: 07/19 doc. AG525990
8.1 Lubricants chart 2
6.2 Lubrication and periodical servicing 4
3.5 Noise protections 5
3.31 Parking the tractor safely 21
3.24 Passengers 18
5.2 Power take o condition for stationary working 28
5.18 power take-o engagement 25
6.3 Practice safe maintenance 5
3.3 Precautions before starting 4
3.6 Proper use of steps and hand grips 5
5.17 PTO mode selector lever independent or proportional to ground speed 24
5.38 Quick attach draft links (hook-type) 63
5.41 Rear distributors combination 86
5.42 Rear hydraulic outputs 87
5.31 Rear track chart 50
5.43 Return output to gearbox 88
4.2 RH side controls 4
3.14 Road circulation 12
3.15 Road transport 13
3.18 Roll over protection structures (ROPS) 14
3.12 Safe maintenance of the cooling system 10
3.16 Safe towing 13
5.16 Selecting rear power take-o speed 23
3.29 Servicing tyres safely 21
5.45 Setting the digital display 98
3.13 Setting the machine on supports 11
5.24 Speed charts 33
5.6 Starting and stopping the tractor 15
5.2 Starting engine 9
5.4 Starting with an auxiliary battery 12
3.25 Stationary jobs 19
3.22 Stay clear of rotating drivelines 18
5.3 Stopping engine 11
7.1 Technical data (V - VLB) 2
5.37 Three-point hitch components 57
3.30 Tightening wheel nuts and bolts 21
3.32 Towing the vehicle 21
3.7 Tractor conditions 6
3.17 Tractor track 13
4.5 Trailer (7-pole) power socket 8
5.28 Trailer hydraulic braking 42
6.6 Transmission and hydraulic maintenance 32
3.33 Transporting the vehicle on a truck 22
5.32 Tyre combination chart 51
5.29 Using 4-wheel drive 44
5.4 Using auxiliary distributors controls 85
5.25 Using brakes 39
5.8 Using clutch engagement/disengagement switch (if any) 16
To Next Page
Loading...
