Break Map (Constrained List)
This field indicates whether Break is to be transmitted by Router, and
selects the TELNET character that is to be used to indicate a Break
character on the LAN.
BREAK – Translate WAN Break to TELNET BREAK
INTERRUPT – Translate WAN Break to TELNET INTERRUPT-
PROCESS
DISABLED – No Break character sent to WAN or LAN.
4.4.4.3 Configure Service Profiles Menu (
conf prof serv or conf sp
command)
Router : Watford CONFIGURE SERVICE PROFILES MENU Rel x.y
--------------------------------------------------------------------------------
----------------- ----------------- ----------------- -----------------
|1 ||2 ||3 ||4 |
| default | | | | | | |
----------------- ----------------- ----------------- -----------------
----------------- ----------------- ----------------- -----------------
|5 ||6 ||7 ||8 |
||||||||
----------------- ----------------- ----------------- -----------------
ED - Edit CO - Copy CL - Clear
--------------------------------------------------------------------------------
PF2 - Help ^B - Prev page PF4 - Main Menu
^N - Next page PF3 - Prev Menu
--------------------------------------------------------------------------------
(conf sp) Enter action:
This menu displays eight profiles at a time. When a profile has a name,
that is also displayed; if not, only the number is shown.
You can specify an action to be carried out on a service profile. Once
selected, you are prompted to specify the profile(s) required.
The edit action requests a single profile, and enters the configure service
profile form. The copy action requests two profiles, a source profile and a
destination profile: the contents are then copied (except the name). The
clear action requests a single profile and then clears the profile to the
initial default values.
X870-300351 Issue 1 4-20 Rev.0
To Next Page
