4.4.4.4 Configure Service Profile Form (conf sp ed command)
Router:Watford CONFIGURE SERVICE PROFILE FORM Rel x.y
--------------------------------------------------------------------------------
Name : def-service Number : 1
Inactivity Timeout :
Initial sequence :
Refresh sequence :
CR map to X.25 : CR CR map from X.25 : CR
LF map to X.25 : LF LF map from X.25 : LF
Telnet Options Service will Echo : YES
Supress GO AHEAD : SUPRESSED BINARY : DISABLED
Local X.3 Parameters : ENABLED Remote X.3 Parameters : ENABLED
Echo : ENABLED Echo : DISABLED
Char. Forwarding : 0 Char. Forwarding : 0
Forward timeout : 2 Forward timeout : 2
--------------------------------------------------------------------------------
PF2 - Help ^R - Restore
PF1 - Submit ^C - Abort
--------------------------------------------------------------------------------
A service profile groups together all the characteristics that are specific to
a service. It is used when establishing a session/connection to a service.
Name (Free Format Text, 15)
This field is optional. It can contain an alphanumeric name unique to this
service profile.
Number (Information)
This field displays the current profile number.
Inactivity Timeout (Free Format Text, 4)
This field is optional. It contains a number from 1 to 9999 minutes.
This value, when present, represents the time that is allowed to elapse
when no activity is taking place on the service connection (input to or
output from the service) before the service connection (session) will be
disconnected. A user connected to this service will then be returned to
dialogue, or in the case of a seamless call will be disconnected.
Initial Sequence (Free Format Text, 39)
This field is optional. It may contain embedded control characters. This
string will be sent to the service when first connected.
X870-300351 Issue 1 4-21 Rev.0
To Next Page
