A
WARNING: Understand the limits of the mecbine. Keep the ma-
chine
under control at all times.
00
NOT TRY TO
00
TOO MUCH
TOO FAST. 3-7-B
L
/');. WARNING: Be careful when you operate the machine in dust,
.. smoke or fog. If you can not see clearly, you can have an accident
34-7-A
A
CAUTION: Never leave machine while engine is running. o-46-72A
WARNING: An explosion can result if sparks or flame contact the
ether in the starting fluid container, or if you keep the container in an
area with the temperatures above 120° F (49° C). Read the following.
1.
Know the correct method for starting your engine with ether.
2.
If you weld, grind, or use
a
cutting torch on the machine, always
remove the starting fluid container from the machine. Use com-
pressed air to remove any ether fumes from the area.
/');. 3. 00
not breathe the ether vapor or let the ether touch your skin.
.. 4. Keep the starting fluid container above the reach of children.
5. Never make a hole in the starting fluid container.
6. 00
not put the starting fluid container in a fire.
7.
When the temperature is above 35° to 40° F (0° to 5° C) remove
the starting fluid container from the machine.
Failure to follow the above procedure can cause a severe injury.
48-12-C
10
To Next Page
Loading...
