Chattanooga Intelect Focus Shockwave - Components; Warning history; Language; Time

13 610 02 1018
31
Operation
Warning history - List of the last 100 warning and error messages
Language - Setting the language
Time - Setting the date and time
Touch screen calibration - This function makes it possible to recalibrate the touch
screen, i.e. for correct recognition of the touch coordi-
nates
Draining the water circuit
Filling the water circuit
- The corresponding sequences for emptying or lling the
water circuit are activated.
Bleeding the water circuit - The corresponding sequences for bleeding the water
circuit are activated.
Resetting water renewal time - Reset the reminder function for the water renewal
Software update - Transferring a software update from the USB memory
stick
Specication of shock wave num-
ber/total energy
- Changeover between shock number and total energy
nominal value specication
Autofreq. on / off - Only in F-SW mode:
Selecting an energy level causes the instrument to switch
to the maximum permitted frequency automatically.
If this function is not activated, the selected frequency is
not exceeded when the energy level is changed. Howe-
ver, it is adapted according to the energy level.