Chemyx Fusion Series User Manual

CHEMYX
Fusion Series User Manual
Chemyx Inc.
10905 Cash Road
Stafford, TX 77477 USA
www.chemyx.com
Updated: 2016-11-08
Intellectual Property
All Intellectual Properties, as defined below, owned by or which is otherwise the property of
Chemyx Inc. or its suppliers relating to the Chemyx syringe pumps, including but not limited to,
accessories, parts or software relating thereto (Chemyx Syringe Pumps), are proprietary to
federal and state laws, and international treaty provisions. Intellectual Property includes but is
not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights,
software, firmware, computer programs, and related documentation and other works of
authorship. Moreover, you agree that you will not, and will not attempt to, modify, prepare
derivative works of, reverse engineer, disassemble the Chemyx syringe pumps, decompile or
otherwise attempt to create source code from the related software/firmware. No title to or
ownership in Intellectual Property is transferred to you. All applicable rights of the Intellectual
Property shall remain with Chemyx and its suppliers.

Chemyx Fusion Series Specifications

General

Pump Type	Syringe Pump
Control Interface	Touchscreen
Communication	RS-232, USB
Power Supply	110/220 VAC, 50/60 Hz
Operating Modes	Continuous
Display	Touch screen

Summary

Warranty and Repair Information

Limited Warranty

Details the two-year warranty against defects, exclusions, and procedures for returns.

Features

Controls

Power and Data Connectors

Specifications

Pump Setup

Powering On/Off the Pump

Step-by-step guide on how to connect power, turn on the pump, and interpret the startup screen.

Loading a Syringe

Adjusting the Safety Collar

Pump Operation

Entering Letters and Mode Selection

Basic Mode

Syringe Selection

Procedure for selecting the syringe inner diameter, crucial for accurate rate and volume calculations.

Target Transfer Volume and Flow Rate

Defines the total volume to be dispensed and how to set the pump's speed.

Multi-Step Mode

Setup

Initial configuration for Multi-Step Mode, including syringe ID, step count, loops, and units.

Total Steps and Loop All

Step Parameters

Defines parameters for each step, including volume, rate, delay, and loops.

Infusion/Withdrawal and Flow Rate

Static, Variable Flow Rate, and Start-Time Delay

Step Loop

Determines how many times a specific step is repeated within a Multi-Step method.

Running the Pump

Pump Control Keys

Explains the function of the Start, Pause, and Stop keys for controlling pump execution.

System Settings

Touchscreen Toggle and Baud Rate

Power Settings

Motor Power and LCD Power-Off Time

Pump Control by Computer

Pump Commands

Pump Maintenance

Lubricating the Pump

Provides instructions and recommendations for lubricating pump components for optimal performance.

Replacing the Fuse

Step-by-step guide for safely replacing a blown fuse in the syringe pump.

Loading Syringes

Appendices

Appendix C: Contact Information

Provides contact details for Chemyx Inc., including address, phone, webpage, and office hours.