Manual Description
This manual covers the basic operational elements and usage of Chemyx Fusion Touch Series
Syringe Pumps using firmware version 1.7.6c.
This manual does not include all aspects of usage or OEM / custom-designed systems that are
fabricated by Chemyx for other companies. Chemyx does not directly support OEM systems
unless otherwise specified.
Additional support material may be found at the Chemyx website: www.chemyx.com/support
General Information
Safety Information
Please read the following safety precautions to ensure personal safety and operational longevity
of the Chemyx syringe pump. Chemyx is not responsible for the equipment if used in a manner
not specified by the manufacturer; warranty coverage provided by the equipment may be
dropped as a result.
CHEMYX PRODUCTS ARE NOT APPROVED FOR CLINICAL USE ON HUMANS.
USE PROPER POWER SUPPLY
Chemyx is not responsible for the use of power supplies outside the stated electrical
specifications or failure to switch the power converter from 220V to 110 V while in the 220V
environment or vice versa.
GROUND PRODUCT
The product should be properly grounded.
DO NOT OPEN THE PUMP
Warranty coverage will be lost if the pump is opened without authorization from Chemyx. Do not
touch any electrical connectors on or in the product.
DO NOT OPERATE WITH SUSPECTED FAILURES
Even though the pump can operate at extremely fast speeds, the user must determine the
proper flow rate for any given application. For instances, pumping at 90 mL/min using a 20-
gauge needle will cause stalls and/or potential bursting of the syringe. Chemyx is not
responsible for any damage that might result from situations similar to the example above.
To Next Page
Loading...