Safety CHLORIDE ACTIVE
GB - 8 V02OCT/01 945040.066
• Upon disconnection from mains, the built-in battery continues to sup-
ply the loads.
• Lay the lines in such a way that no one can step on or trip over them
and so that the lines are not pinched. When connecting the device,
observe the notices in chapter “Installation and commissioning” on
page GB - 19.
• During thunderstorms, data transfer cables must not be connected or
disconnected.
• Ensure that no objects (e.g. jewellery chains, paper clips etc.) are left
inside of the device.
• In the event of an emergency (e.g. damaged housing, operating ele-
ments or mains lines, penetration of fluids or foreign bodies), switch off
the device, pull the mains plug and contact the responsible customer
service representative.
• Repair work may only be carried out by authorised personnel. Unau-
thorised opening and improper repairs can expose the user to serious
danger.
• Do not connect any devices which overload the UPS (e.g. laser printer
or vacuum cleaner) or which draw DC current from the UPS (e.g. half-
wave rectifiers found in hair dryers).
• When cleaning, observe the notices in chapter “Maintenance” on page
GB - 35.
• The sum of the leakage currents (current in the earth conductor) from
the UPS and connected loads must not exceed the value of 3.5 mA for
the models ACTIVE 700(-19), ACTIVE 1000(-19), ACTIVE 2000(-19)
and ACTIVE 3000(-19).
To Next Page
Loading...
