Chloride ACTIVE 700 - Symbols on the Front Side of the UPS

CHLORIDE ACTIVE Introduction
945040.066 V02OCT/01 GB - 11
G
B
In the event of an overload or an internal failure, the load is supplied without
interruption directly by the mains supply via the automatic bypass. As soon
as normal operating conditions are restored, the system automatically
switches back to inverter operation.
Below, the symbols located on the front side of the UPS are shown and
described:
Fig. 1: Symbols on the front side of the UPS
!
LOAD BYPASS INVERTER BATTERY MAINS ALARM