CHLORIDE ACTIVE Safety
945040.066 V02OCT/01 GB - 7
G
B
Safety
Intended use
UPS devices serve as an uninterruptible power supply for connected loads.
They are in compliance with all relevant safety regulations concerning infor-
mation technology equipment, including electronic office machines for use
in an office environment.
In certain configurations, battery packs are part of the UPS devices. These
battery packs may only be connected electrically with the corresponding
base device.
Safety Notices
Danger
Carefully read the following safety notices! Failure to observe the no-
tices endangers your life, your health, the reliability of your device or
the security your data.
• Use only suitable packaging to transport the device (protect against
shock and impact).
• If the device is brought in from a cold environment, moisture conden-
sation can occur. Before commissioning the device, it must be com-
pletely dry. For this reason, an acclimation time of at least two hours
is required.
• When selecting a location for the device and during commissioning,
observe the notices concerning environmental conditions given in
chapter “Technical data” on page GB - 39.
• Rack-mounting devices as well as the corresponding battery exten-
sions must only be mounted in horizontal position (see chapter “Instal-
lation notes for rack-mounting devices” on page GB - 19).
• This device is equipped with a safety-inspected mains line and must
only be connected to a grounded earthing-contact socket.
•The button does not separate
the device from mains. To com-
pletely separate from mains, the UPS must be switched to bypass and
the mains plug pulled (see chapter “Indicator and operating elements”
on page GB - 12).
• Make certain that the socket on the device or the earthing-contact
socket of the house installation is freely accessible.
To Next Page
Loading...
