Ciena 5160 - Page 8

viii Contents
5160 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3207-001 Standard Revision A
Copyright
©
2013 Ciena
®
Corporation September 2013
Turning Up the System 3-1
Logging in through the Serial Console Port 3-2
Creating a New User Account 3-2
Deleting a User Account 3-3
Managing Licenses 3-3
Configuring the Remote Management Interface 3-4
Accessing the CLI Using Telnet 3-5
Configuring the Local Management Interface 3-5
Configuring an Interface using DHCP 3-5
Setting the System Host Name 3-6
Logging Out of the System 3-6
List of procedures
3-1 Logging in through the Serial Console Port 3-7
3-2 Creating a new user account 3-8
3-3 Deleting a user account 3-9
3-4 Managing Licenses 3-10
3-5 Configuring the Remote Management Interface 3-11
3-6 Accessing the CLI using Telnet 3-12
3-7 Configuring the Local Management Interface 3-13
3-8 Configuring an Interface using DHCP 3-14
3-9 Setting the System Host Name 3-15
3-10 Logging out of the System 3-16
Maintenance 4-1
Replacing a Power Supply Module 4-1
Simplex Power 4-1
Redundant Power 4-2
AC Power Supplies 4-2
DC Power Supplies 4-2
4-1 Replacing an AC Power Supply 4-3
4-2 Replacing a DC Power Supply 4-4
LED Overview 5-1
System Reset Button and LED Behavior 5-2
Unit Status LEDs 5-3
Power Supply LEDs 5-4
1/10 Gigabit Ethernet Port LEDs 5-5
Local Management Port LEDs 5-6
Sync Port 5-7
Technical Specifications 6-1
Regulatory Compliance 7-1
Canada 7-3
CE Compliance 7-3
FCC Statement 7-3
VCCI - Japan 7-3