CIGWELD WeldSkill 200AC/DC - Disassembly Procedure; Safety Precautions for Disassembly; Case Removal

Manual 0-5206 7-1 Disassembly Procedure
DISASSEMBLY PROCEDURE WELDSKILL 200AC/DC INVERTER
7.01 Safety Precautions for Disassembly
!
Read and follow safety information in Section 6.02 before proceeding.
Unplug unit before beginning Disassembly procedure.
7.02 Case Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. Remove Screws on front panel.
2. Remove Screws on rear panel.
3. Remove Screws on side panel.
4. Remove ground screw.
1
2
3
4
A-11431
SECTION 7:
DISASSEMBLY PROCEDURE