CIGWELD WeldSkill 200AC/DC - Front Panel Assembly Removal

WELDSKILL 200AC/DC INVERTER DISASSEMBLY PROCEDURE
Disassembly Procedure 7-6 Manual 0-5206
7.08 Front Panel assembly Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. Remove front panel screws.
2. Remove Positive Output Terminal Bolt.
3. Remove Negative Output Terminal Bolt.
4. Remove ground wire from front panel.
5. Disconnect hose from outlet.
1
2
4
3
5
A-11437