155
Update
Chapter 5
Applyin
Formats for Data Editin
5.3 CONFIGURING FORMAT — DEFINE DATA CRITERIA
Three applicable conditions can be configured to check whether the data read by the
scanner can be processed by the particular editing format.
Note: Data editing cannot be performed unless the three conditions are all met.
5.3.1 APPLICABLE CODE TYPE
By default, barcodes of all the supported symbologies will be processed by any editing
format, if having been configured and enabled. For quick configuration, first clear all, and
then select the desired symbologies.
Note: It must have at least one symbology selected.
*Apply to All
Clear All
To Next Page
Loading...
Need help?
General
