12
Enter Setup
1504 Barcode Scanner
User Guide
LIST THE CURRENT SETTINGS
The current settings of all scanner parameters can be sent to the host computer for user
inspection. The listing includes pages as shown below. Select the page of interest by
having the scanner read the “List Page x” barcode. The scanner will respond with two
beeps (low-high tone) and send the selected page to the host immediately.
Lists settings regarding Firmware Version,
Serial Number, Interface, Buzzer, and Other
Scanner Parameters
List Page 1
Lists settings regarding Prefix, Suffix, and
Length Code Setting (1/2)
List Page 2
Lists settings regarding Prefix, Suffix, and
Length Code Setting (2/2)
List Page 3
Lists settings regarding Code ID
List Page 4
Lists settings regarding: Readable Symbologies
(1/2)
List Page 5
Lists settings regarding: Readable Symbologies
(2/2)
List Page 6
Lists settings regarding Symbology Parameters
(1/3)
List Page 7
Lists settings regarding Symbology Parameters
(2/3)
List Page 8
Lists settings regarding Symbology Parameters
(3/3)
List Page 9
Reserved
List Page 10
To Next Page
Loading...
Need help?
General
