237
Update
Appendix I Firmware Upgrade
For the communication settings, select
“RS-232” and the correct COM port for
Bluetooth
®
SPP interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
5) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 2 (=Bluetooth
®
SPP).
To Next Page
Loading...
Need help?
General
