17
Update
Quick
Start
LIST THE CURRENT SETTINGS
The current settings of all scanner parameters can be sent to the host computer for user
inspection. The listing includes pages as shown below. You can select the page of interest
by having the scanner read the “List Page x” barcode. The scanner will respond with two
beeps (low-high tone) and send the selected page to the host immediately.
List settings regarding Firmware Version, Serial
Number, Interface, Buzzer, and Other Scanner
Parameters
List Page 1
List settings regarding Prefix, Suffix, and Length
Code Setting (1/2)
List Page 2
List settings regarding Prefix, Suffix, and Length
Code Setting (2/2)
List Page 3
List settings regarding Code ID
List Page 4
List settings regarding: Readable Symbologies
(1/2)
List Page 5
List settings regarding: Readable Symbologies
(2/2)
List Page 6
List settings regarding Symbology Parameters
(1/3)
List Page 7
List settings regarding Symbology Parameters
(2/3)
List Page 8
List settings regarding Symbology Parameters
(3/3)
List Page 9
Reserved
List Page 10
To Next Page
Loading...
Need help?
General
