27
Update
Chapter 1
Understandin
he Barcode Scanner
1.2.2 MEMORY MODE
When the scanner is in memory mode, it means any real-time connection established
with the host is disabled. 1664 scanner keeps 4MB flash memory for memory mode
operation, which can store over 240,000 scans based on EAN-13 barcodes.
Enable
*Disable
Warning: No real-time connection is allowed unless the memory mode is disabled.
Memory Data Delay
You may set a delay between each data record while transmitting data back to the host.
*None
250 ms
500 ms
1 sec
2 sec
3 sec
5 sec
To Next Page
Loading...
