53
Update
Chapter 2
Selectin
Output Interface
2.1.1 ACTIVATE BLUETOOTH
®
HID & SELECT KEYBOARD TYPE
When Bluetooth
®
HID interface is activated, you will have to select a keyboard type to
complete this setting. By default, Bluetooth
®
HID is activated on the scanner, and the
keyboard type is set to PCAT (US).
Activate Bluetooth
®
HID & Select Keyboard
Type…
1) Read the barcode above to activate Bluetooth
®
HID and select a keyboard type.
2) Read the “
Decimal Value” barcode on page 251. Refer to the table below for the
number of desired keyboard type.
3) Read the “Validate” barcode on the same page to complete this setting.
Bluetooth
®
HID
The following keyboard types are supported —
No. Keyboard Type No. Keyboard Type
64 PCAT (US) 71 PCAT (Belgium)
65 PCAT (French) 72 PCAT (Spanish)
66 PCAT (German) 73 PCAT (Portuguese)
67 PCAT (Italy) 74 PS55 A01-2 (Japanese)
68 PCAT (Swedish) 75 User-defined table
69 PCAT (Norwegian) 76 PCAT (Turkish)
70 PCAT (UK) 77 PCAT (Hungarian)
To Next Page
Loading...
Need help?
General
