Circutor CVM-C11-ITF-IN-485-ICT2 - 4�7�- Digital Outputs

Table 16 (Continuation): Selecting the tariff in accordance with the input status.
IN1, Input 1 IN2, Input 2
Tariff
Synchronism pulse Logic input Tariff selection Logic input Tariff selection
0 0 T1
0 1 T3
1 0 T2
1 1 T1
4.7.- DIGITAL OUTPUTS
The CVM-C11 has two NPN transistors outputs (terminals 6, 7 and 8 on Figure 1), fully programmable,
see “6.27.- PROGRAMMING ALARM 3 (DIGITAL OUTPUT T1)” and “6.28.- PROGRAMMING ALARM 4 DIGITAL
OUTPUT T2)”.
28
CVM-C11
Instruction Manual