Configuration values
Table 32:Configuration values: Selecting the screens.
Selecting the screens
Possible values
Yes, to display the screen in the user menu.
No, to stop displaying the screen.
Press key to access the next programming step.
This programming step is repeated for each one of the 19 screens of the device.
6.15.- BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
The time that the Backlight will stay lit (in seconds) is programmed on this screen after the last
keystroke on the device.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
To validate the data, press for 3 seconds and the icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 33:Configuration values: Backlight.
Backlight
Minimum value 0 seconds.
Maximum value 99 seconds.
Note: The value 00 indicates that the backlight will stay permanently lit.
Press key to access the next programming step.
49
Instruction Manual
CVM-C11
To Next Page
Loading...
