4.2.- DISPLAY
The device has a backlit LCD display showing all the parameters listed in Table 4 ... Table 10.
The display is divided into two areas (Figure 13):
Units and status
area
Data area
Figure 13: CVM-C11 Display areas.
The data area, which displays all the values measured by the device.
The units and status area, which displays the different statuses, units and device information
(Table 6).
Table 11:Display icons.
Icon Description Icon Description
Analyzer profile.
Analog bar, where the % of the current
power of the installation is shown.
Electrical energy efficiency
profile, e
3
.
Quadrant in which the device is working.
User profile.
cos φ or the power factor of the instal-
lation.
Maximum demand. Consumption.
Maximum value. Generation.
Minimum value. Digital input connected.
Configuration menu protected
by password.
Relay disconnected or connected.
23
Instruction Manual
CVM-C11
To Next Page
Loading...
