The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 53:Configuration values: Pulse width.
Pulse width
Minimum value 30 ms
Maximum value 400 ms
Press key to access the next programming step.
6.28.- PROGRAMMING ALARM 4 DIGITAL OUTPUT T2
All values for digital output T2 are programmed on this screen.
La programación es la misma que para la salida digital T1, ver “6.27.- PROGRAMACIÓN DE LA ALARMA 3
SALIDA DIGITAL T1”.
6.29.- OPERATING MODE OF DIGITAL INPUT 1
The function of digital input 1 is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
65
Instruction Manual
CVM-C11
To Next Page
Loading...
