Circutor CVM-C11-ITF-IN-485-ICT2 - 6�18�- Deleting Energy Values; 6�19�- Selecting the Range of Energies

Configuration values
Table 35:Configuration values: Deleting maximum and minimum values.
Deleting maximum and minimum values
Possible values
Yes
No
Press key to access the next programming step.
6.18.- DELETING ENERGY VALUES
On this screen you select whether or not to delete the energy values.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 36:Configuration values: Deleting energy values.
Deleting energy values
Possible values
Yes
No
Press key to access the next programming step.
6.19.- SELECTING THE RANGE OF ENERGIES
The operation of the range of energy is selected on this screen.
51
Instruction Manual
CVM-C11