Circutor CVM-C11-ITF-IN-485-ICT2 - 6�7�- Number of Quadrants

To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 22:Configuration values: Secondary neutral current.
Secondary neutral current
Possible values
1 A
5 A
Press key to access the next programming step.
6.7.- NUMBER OF QUADRANTS
The quadrant number on which the device takes the measurement is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 23:Configuration values: Number of quadrants.
Number of quadrants
Possible values
2
4
Press key to access the next programming step.
42
CVM-C11
Instruction Manual