6.34.- MODBUS PROTOCOL: PARITY
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The type of parity of Modbus communications is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 59:Configuration values: Modbus, Parity.
Modbus: Parity
Possible values
no no parity
EvEn even parity.
odd odd parity.
Press key to access the next programming step.
6.35.- MODBUS PROTOCOL: NUMBER OF DATA BITS
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The number of data bits of Modbus communications are programmed on this screen.
Note: This parameter cannot be modified.
Press key to access the next programming step.
69
Instruction Manual
CVM-C11
To Next Page
Loading...
