Configuration values
Table 57:Configuration values: Modbus, Baud rate.
Modbus: Baud rate
Possible values
9600 bauds
19200 bauds
38400 bauds
Press key to access the next programming step.
6.33.- MODBUS PROTOCOL: PERIPHERAL NUMBER
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The peripheral number is programmed on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 58:Configuration values: Peripheral number.
Peripheral number
Minimum value 1
Maximum value 255
Press key to access the next programming step.
68
CVM-C11
Instruction Manual
To Next Page
Loading...
