5. DISPLAY
The CVM-C11 has 3 operation profiles. The display screens will be opened for the corresponding profile:
Analyzer profile.
Electrical energy efficiency profile, e
3
.
User profile.
Use the key to jump between the different profiles.
5.1.- ANALYZER PROFILE
This profile is identified by the symbol at the top of the screen.
The device displays 12 different screens for the analyzer profile and the voltage and current harmonics,
up to the 31st order harmonic, for each one of the lines, L1, L2 and L3. (“5.4.- HARMONICS”).
Use keys and to browse the different screens.
Phase-phase Voltage L1-L2
Phase-phase Voltage L2-L3
Phase-phase Voltage L3-L1
Phase-phase Voltage III
Phase-neutral Voltage L1
Phase-neutral Voltage L2
Phase-neutral Voltage L3
Phase-neutral Voltage III
Note: Screen not visible for installation types 3-3Ph 3-ArON
and 2-2Ph.
Current L1
Current L2
Current L3
Neutral Current
(1)
(1)
Not available for the 3-3Ph and 3-ArON installation types.
29
Instruction Manual
CVM-C11
To Next Page
Loading...
