Circutor CVM-C11-ITF-IN-485-ICT2 - 6�30�- Operating Mode of Digital Input 2

Configuration values
Table 54:Configuration values: Operating mode of digital input 1.
Operating mode of digital input 1
Possible values
LoGic Logic input
tAriFF Tariff selection.
PuLSe Maximum Demand Synchronism Pulse
Note: When generating the synchronism pulse of the Maximum Demand, the device restarts the
calculation of the maximum demand.
Press key to access the next programming step.
6.30.- OPERATING MODE OF DIGITAL INPUT 2
The function of digital input 2 is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 55:Configuration values: Operating mode of digital input 2.
Operatinf mode of digital input 2
Possible values
LoGic Logic input
tAriFF Tariff selection.
Press key to access the next programming step.
66
CVM-C11
Instruction Manual