Cisco 2431 - IAD Router - Appendix; Cisco IAD2430 Series Configuration Examples; Sample Configuration: Cisco IAD2435-8 FXS

A-1
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
OL-4306-03
APPENDIX
A
Cisco IAD2430 Series Configuration Examples
This appendix presents the following sample configurations for the Cisco 2430 series IADs:
• Sample Configuration: Cisco IAD2435-8FXS, page A-1
• Sample Configuration: Cisco 2430-24FXS, page A-3
• Sample Configuration: Cisco 2431-1T1/E1 with WIC-2T, page A-6
• Sample Configuration: Cisco 2432-24FXS with VIC2-4FXO and QoS, page A-8
Sample Configuration: Cisco IAD2435-8FXS
Current configuration : 1089 bytes
!
version 12.4(1)T
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2435-8FXS
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
controller T1 1/0
framing sf
linecode ami
channel-group 0 timeslots 1-24
!
!
!
interface FastEthernet0/0
ip address 1.3.21.53 255.255.0.0
no ip mroute-cache
duplex auto
speed auto