Contents
v
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
OL-4306-03
Configuration for Router R12-e 4-5
Configuration for IAD-2 4-6
Linking PBX Users with Digital E&M Trunk Lines over T1/E1 CAS 4-6
IAD SJ Configuration 4-7
IAD SLC Configuration 4-7
PSTN Gateway Access Using an FXO Connection 4-8
IAD SJ Configuration 4-8
IAD SLC Configuration 4-9
PSTN Gateway Access Using an FXO Connection in PLAR Mode 4-9
IAD SJ Configuration 4-9
IAD SLC Configuration 4-10
APPENDIX
A Cisco IAD2430 Series Configuration Examples A-1
Sample Configuration: Cisco IAD2435-8FXS A-1
Sample Configuration: Cisco 2430-24FXS A-3
Sample Configuration: Cisco 2431-1T1/E1 with WIC-2T A-6
Sample Configuration: Cisco 2432-24FXS with VIC2-4FXO
and QoS A-8
APPENDIX
B Formatting the Flash Memory B-1
Formatting Procedures for Flash Memory B-1
Formatting Procedures B-1
Determining the File System on Flash Memory B-1
Formatting Flash Memory as a Class B Flash File System B-3
Formatting Flash Memory as a Class C File System B-4
File and Directory Operations B-5
Operations for Use with Class B Flash File System B-5
Operations for Use with Class C Flash File System B-7
File Operations for Class C Flash File System B-8
Directory Operations for Class C Flash File System B-10
APPENDIX
C Using the ROM Monitor C-1
Entering the ROM Monitor Mode C-1
ROM Monitor Commands C-2
Command Descriptions C-3
Recovering Boot and System Images C-4
Using the xmodem Command C-4
Using the tftpdnld -r Command C-5
To Next Page
Loading...
