Cisco 2431 - IAD Router - Sample Configuration: Cisco 2431-1 T1;E1 with WIC-2 T

A-6
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
OL-4306-03
Appendix A Cisco IAD2430 Series Configuration Examples
Sample Configuration: Cisco 2431-1T1/E1 with WIC-2T
Sample Configuration: Cisco 2431-1T1/E1 with WIC-2T
Current configuration : 1755 bytes
!
version 12.4(1)T
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2431-2T1/E1-1
!
logging queue-limit 100
logging buffered 10000000 debugging
no logging console
!
network-clock-select 1 T1 1/0
ip subnet-zero
!
!
!
backhaul-session-manager
set vsc1_set client nft
group vsc1_grp set vsc1_set
isdn switch-type primary-ni
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
controller T1 1/0
shutdown
framing sf
linecode ami
channel-group 0 timeslots 1-24
!
controller T1 1/1
mode cas
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-start
!
!
!
interface Multilink1
ip address 10.1.1.1 255.255.0.0
ppp multilink
multilink-group 1
!
interface FastEthernet0/0
ip address 1.3.21.56 255.255.0.0
duplex auto
speed auto
ip rsvp bandwidth 1 1
!
interface Serial0/0
no ip address
encapsulation frame-relay
clockrate 2000000