Cisco 6000 series User Manual

PurposeCommand or Action
Example:
• Replace the instance argument with one of the
following instances:
RP/0/RP0/CPU0:router(config)# no interface TenGigE
0/2/0/4.10
• Physical Ethernet interface instance, or with an
Ethernet bundle instance. Naming notation is
rack/slot/module/port, and a slash between values
is required as part of the notation.
• Ethernet bundle instance. Range is from 1 through
65535.
• Replace the subinterface argument with the
subinterface value. Range is from 0 through 4095.
Naming notation is instance.subinterface, and a period
between arguments is required as part of the notation.
—Repeat Step 2 to remove other VLAN subinterfaces.
Step 3
Saves configuration changes.Do one of the following:
Step 4
• end • When you issue the end command, the system prompts
you to commit changes:
•
• commit
Uncommitted changes found, commit them before
Example:
exiting(yes/no/cancel)?
[cancel]:
RP/0/RP0/CPU0:router(config)# end
• • Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to XR EXEC mode.
Example:
Example:
• Entering no exits the configuration session and
returns the router to XR EXEC mode without
committing the configuration changes.
RP/0/RP0/CPU0:router(config)# commit
• Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
(Optional) Displays the interface configuration.
show ethernet trunk bundle-ether instance
Step 5
Example:
The Ethernet bundle instance range is from 1 through 65535.
RP/0/RP0/CPU0:router# show ethernet trunk
bundle-ether 5
Configuration Examples for VLAN Interfaces
This section contains the following example:
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
119
Configuring 802.1Q VLAN Interfaces
Configuration Examples for VLAN Interfaces

Cisco 6000 series Specifications

General

Category	Network Router
Model	Cisco 6000 series
Routing Protocols	BGP, OSPF, EIGRP, IS-IS, RIP
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Ports	Varies by model
Power Supply	Redundant power supply options
Dimensions	Varies by model
Weight	Varies by model
Redundancy	Power supplies, fans, route processors
Operating System	Cisco IOS