Cisco 6000 series User Manual

The following example shows how to configure custom LACP short period transmit and receive intervals to
less than the default of 1000 milliseconds (1 second):
Router A
config
interface TenGigE 0/1/0/1
bundle id 1 mode active
lacp period short
commit
Router B
config
interface TenGigE 0/1/0/1
bundle id 1 mode active
lacp period short
commit
Router A
config
interface TenGigE 0/1/0/1
lacp period short transmit 100
commit
Router B
config
interface TenGigE 0/1/0/1
lacp period short transmit 100
commit
Router A
config
interface TenGigE 0/1/0/1
lacp period short receive 100
commit
Router B
config
interface TenGigE 0/1/0/1
lacp period short receive 100
commit
Additional References
These sections provide references related to link bundle configuration.
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
93
Configuring Link Bundling
Additional References

Cisco 6000 series Specifications

General

Category	Network Router
Model	Cisco 6000 series
Routing Protocols	BGP, OSPF, EIGRP, IS-IS, RIP
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Ports	Varies by model
Power Supply	Redundant power supply options
Dimensions	Varies by model
Weight	Varies by model
Redundancy	Power supplies, fans, route processors
Operating System	Cisco IOS