xi
Cisco 7600 Series Router Installation Guide
OL-4503-26
Preface
Audience
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS3260) should install,
replace, or service the equipment described in this publication.
Organization
This publication is organized as follows:
OL-4503-12 August 2004 • Added DWDM information to Appendix B.
OL-4503-11 July 2004 • Initated Document Revision History in Preface.
• Added1400 W AC and 3000 W AC power supplies to
Chapters 1, 2, and 5, and Appendix A.
• Added information on cleaning opical interfaces to Chapter
3and to Appendix B.
• Added notes to 4000 W DC power supply section concerning
the amount of space necessary to install power cables and the
amount of torque necessary for tightening terminal nuts to
Chapter 5.
• Added Appendix D for configuration register information.
• Added power supply and PEM table to Chapter 1.
Revision Date Change Summary
Chapter Title Description
Chapter 1 Product Overview Describes and lists the hardware features and
functionality of the Cisco
7600 series routers.
Chapter 2 Preparing for Installation Describes how to prepare your site for the installation
of the Cisco
7600 series routers.
Chapter 3 Installing the Cisco 7600
Series Router
Describes how to install your Cisco 7600 series router.
Chapter 4 Troubleshooting Provides troubleshooting guidelines for the initial
hardware installation and suggests steps to help isolate
and resolve problems.
Chapter 5 Removal and Replacement
Procedures
Provides procedures for removing and installing
chassis components.
Appendix A Technical Specifications Lists the Cisco 7600 series router system
specifications.
Appendix B Connector and Cable
Specifications
Describes the connectors and cables used with the
Cisco
7600 series routers.
Appendix C Repacking the Cisco 7600
Series Router
Provides procedures to repack your Cisco 7600 series
router if you have to return it to the factory.
To Next Page
Loading...
Need help?
General
